James R. Johnson ** USAforging@gmail.com ** 940 6274529 ** 2955 CR 1370 Alvord, TX 76225
Johnson Metalsmithing LLC Follow me on Instagram: http://www.instagram.com/james_johnson_anyang_usa
WARNING
Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.
You as the purchaser of the product are acknowledging the risks involved and accept full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees, and representatives from any and all liability related to its use.
Do not under any circumstances operate the equipment without training, eye, ear, and body protection. Do not make modifications to the equipment.
Power Hammer and Press Prices are subject to change
COPYRIGHT © 2010 ANYANG USA and JOHNSON METALSMITHING LLC - ALL RIGHTS RESERVED.
Anyang USA Power Hammer and Hydraulic Press Since 1956
Latest Podcast from the Blacksmithspub
Hammer Specifications
Length 53"
Width 25"
Height 74"
Die height 37"
Die length 4.75"
Die width 3.125"
Beats/min. 220
Weight lbs. 3280
Motor Specs (Standard)
WEG High Torque
Electrical input single phase
Voltage 230
Speed RPM 1160
Amperage 22
Motor HP 5
Plug Nema Code L6-30P
106 LB. HS/ 48.3 KG Power Hammer
Standard Features:
Warranty:
Frame: Lifetime from AFP
Internal wearing parts: 5 year
Motor: 3 year from WEG
USA oil flow control valves
USA Electrical components (assembled and tested in my shop)
Key out design, heavier anvil mass, deeper throat
H13 dies with holes for bolt-on tooling
WEG 5 hp single phase motor
Motor Specs: W22 5 HP 6P 213/5T 1Ph 208-230/460 V 60 Hz IC411 - TEFC - Foot-mounted | W22 | W22 | TEFC Cast Iron | General Purpose | AC Motors - NEMA | Electric Motors | WEG - Products
Cost $12,450